logo
Nhà Sản phẩmKeo Epoxy AB

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Tôi trò chuyện trực tuyến bây giờ

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Hình ảnh lớn :  Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Thông tin chi tiết sản phẩm:
Nguồn gốc: Hồ Nam, Trung Quốc
Hàng hiệu: DEYI
Thanh toán:
Số lượng đặt hàng tối thiểu: 10000

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Sự miêu tả
Màu sắc: Thông thoáng Độ nhớt: > 100000 cps/25
Tỷ lệ hỗn hợp: 1: 1 Thời gian làm việc: 20 phút
Chạm vào thời gian khô: 30 phút Thời gian chữa bệnh đầy đủ: 24 giờ
Lap Shear Sức mạnh: ≥16 MPA Khả năng chịu nhiệt: -60 đến +100
Hạn sử dụng: 12 tháng Tài liệu chính: Ethyl-cyanoacrylate
Kháng axit: Đúng Kháng kiềm: Đúng
Kháng dầu: Đúng không thấm nước: Đúng
Không bắt lửa: Đúng
Làm nổi bật:

Heat Resistant Epoxy AB Glue

,

Touch Dry in 30 Minutes Epoxy Resin Adhesive

,

Full Cure in 24 Hours Two-Component Epoxy

30 Minutes Epoxy Resin/Epoxy Adhesive AB Glue Black and White
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 0
DEYI-730 30 minutes epoxy resin/epoxy adhesive AB glue black and white
30-MIN EPOXY ADHESIVE is resistant to acid, alkali, and oil. Non-flammable, non-shrinking and waterproof. Makes metallic grey finish. Can be filed, grinded and drilled.
Technical Parameters
Color Viscosity (CPS/25℃) Mixture Work Time (25℃/100g) Cure Time (25℃/100g) Lap Shear Strength (St-St) Heat Resistance (℃) Shelf Life (25℃)
A:black A:>100000 1:1 20 Minutes Touch Dry:30 Mins ≥16 Mpa -60 to +100 12 months
B:milky white B:>100000 Full Cure: 24 hrs
Product Description
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 1 Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 2 Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 3 Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 4
Storage & Warnings
Storage:
  • Store the adhesive in shady, dry, well-ventilated, damp-proofing places.
  • Store the adhesive at room temperature.
  • Keep away from any source of ignition.
Warnings:
  • The adhesive is irritable to skin and eyes.
  • Keep out of reach of children.
  • In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
Directions
  • Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
  • Remove the cap from the tube and puncture the tubes.
  • Mix part A and part B at the ratio of 1:1. Mix thoroughly until a uniform color is achieved. It must be used within 20 minutes.
  • Apply a thin coat to both surfaces. Mixture will become warm while it sets. No clamping. Slight pressure is needed while material sets.
  • If temperature is below 5℃, it will take a longer time to cure.
Cautions
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 5

Chi tiết liên lạc
Hunan Baxiongdi New Material Co., Ltd.

Người liên hệ: SU

Tel: 008615200906996

Fax: 86-731-86677379

Gửi yêu cầu thông tin của bạn trực tiếp cho chúng tôi (0 / 3000)